Item name : 0.6/1kv 7 core 0.75mm2 kvv control cable
APPLICATION OF 0.6/1kv 7 core 0.75mm2 kvv control cable
0.6/1kv 7 core 0.75mm2 kvv control cable (KVV) is mainly used for system connection wire of control,signal,protection or measuring for rated voltage up to and including 450/750V.
CABLE STANDARDS OF 0.6/1kv 7 core 0.75mm2 kvv control cable
GB/T,JB/T,IEC,BS,DIN,ICEA up on request.
BASIC INFORMATION OF 0.6/1kv 7 core 0.75mm2 kvv control cable
Code Name
KVV
Rated Voltage (Uo/U)
450/750V
Cable Structure
CU/PVC Insulation/PVC Sheathed
CONSTRUCTION OF 0.6/1kv 7 core 0.75mm2 kvv control cable
Conductor
Preferred Number of cores:
2,3,4,5,7,8,10,12,14,16,19,24,27,30,37,44,48,52,61
The conductors shall comply with the requirement given in IEC 60228 for class 1 or 2.
– class 1 for solid conductors;
– class 2 for stranded conductors.
Insulation
PVC(Polyvinyl Chloride) Type PVC/A according to IEC
Sheathed
PVC(Polyvinyl Chloride) Type PVC/ST1 according to IEC
Other special application cable can be provided upon requests:
Fire-resistant,Flame-retardant,Low-halogen,Non-halogen,Low-fume,Low-smoke,as well as acid-alkali-proof,High temperature resistant,Termite and Rodent resistant, Water proof series and so on.
CHARACTERISTICS OF 0.6/1kv 7 core 0.75mm2 kvv control cable
Conductor temperature
Maximum conductor temperature in normal use: 70℃
Installation temperature
Ambient temperature under installation shall not be below 0℃
Max.temperature of conductor under short circuit-(Max.Duration 5 sec.)
PVC Insulated:160℃
Preferred Permissible bending radius
For non-armoured PVC insulated cable not less than: 6 times of cable diameter