0.6/1kV ZR XLPE Insulated Power Cable YJV Cable

Specifications 1.0.6/1kV ZR XLPE Insulated Power Cable YJV cable 2.STA/SWA,No armore 3.XLPE insulated 4.IEC,VDE,AS/NZS,BS standard 0.6/1kV ZR XLPE Insulated Power Cable YJV cable 1 Information a, Construction: Conductor: Solid or stranded copper Insulation: Cross-linked polyethylene (XLPE) or...
Chat Now

Product Details

Specifications

1.0.6/1kV ZR XLPE Insulated Power Cable YJV cable 
2.STA/SWA,No armore 
3.XLPE insulated 
4.IEC,VDE,AS/NZS,BS standard

0.6/1kV ZR XLPE Insulated Power Cable YJV cable

 

1 Information

 

a, Construction:

Conductor: Solid or stranded copper 
Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC) 
Filler: Polypropylene filament with lapped binding tape 
Binder: Binding tape 
Inner sheath: Polyvinyl chloride (PVC) 
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) 
Sheath: Polyvinyl chloride (PVC)

 

b, Features

 XLPE  insulated power cable do not has excellent electric, mechanical properties,but also has powerful resistance against chemical corrosion,heat resistance and enviromental stress resistance. Its structure is simple. The long period operating temperature is +90 °C. It is conveninet to use and can be laid with no restriction of different level.

 

XLPE insulated steel wire armoured power cable: XLPE/PVC insulated power cable has a number of advantages over paper insulated and PVC insulated cable. XLPE cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction. 

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of A, B, C.

 

Application

 

1)These cables are most suitable for direct burial or for installation on trays or ducts,  Where there is
a risk of mechanical damage, armoured cables should be used.

2) For laying in ground along route with large difference of level able to bear external mechanical forces.

 

3 Model and Name

 

China Type

Description

Application

Cu

Al

YJV

YJLV

XLPE insulation PVC sheath power cable (Cu/XLPE/PVC)

To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside 

YJY

YJLY

XLPE insulation PE sheath power cable (Cu/XLPE/PE)

YJV22

YJLV22

 XLPE insulation, steel tape armor,  PVC sheath power cable

(Cu/XLPE/PVC/STA/PVC)

To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.

YJV23

YJLV23

XLPE insulation, steel tape armor,  PE sheath power cable

(Cu/XLPE/PVC/STA/PE)

YJV62

YJLV62

XLPE insulation,  no  magnetism steel tape armor,  PE sheath power cable

YJV32

YJLV32

XLPE insulation, thin steel-wire  armor,  PVC sheath power cable

(Cu/XLPE/PVC/SWA/PVC)

Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint

.

YJV72

YJLV72

XLPE insulation, have no the magnetism thick steel-wire  armor,  PVC sheath power cable

YJV42

YJLV42

XLPE insulation, thick steel-wire  armor,  PVC sheath power cable

Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint

 

4 Specification

 

1.Uo/U:0.6/1KV

 

2.Standard applied: IEC60502, BS6346, GB/T12706

 

3.Max.working temperature: PVC insulated:70°C, can be 90°C and 110°C as per requirement

PVC insulated: 90°C, can be 110°C as per requirement

 

4.Conductor:  Class 1/2 annealed bare copper solid or strands

 

5.Insulation:PVC/XLPE

 

6.Cores: 1C, 2C, 3C,4C,5C, 3C+1E,4C+1E,3C+2E

 

7.Cross section: 1.5 mm2~ 630 mm2

 

8.Armoure:No Armoure,STA( Remark: for single core the armore should be ATA )

   SWA(Remark: for single core the armore should be AWA)

 

9.Sheath:PVC

 

10.Color:Black or other as request

 

11.Flame retardant or Fire resistance or low smoking and Halogen Free are available.

 

12.Wooden Drum or as per request


Inquiry