50mm2 Iec 0.6/1kv Electrical Armoured Power Cable

50mm2 Iec 0.6/1kv Electrical Armoured Power Cable

CONSTRUCTION: 1. Stranded copper conductor class 2 2. XLPE insulation 3. PP Filling 4. Non-woven fabrics wrapping 5. PVC inner sheath 6. Steel wire armored 7. Non-woven fabrics wrapping 8. PVC outer sheath APPLICATION YJV32-Copper Conductor XLPE Insulated Steel Wire Armoured PVC Sheathed...
Chat Now

Product Details

50mm2 Iec 0.6/1kv Electrical Armoured Power Cable

Product Description


50mm2 Iec 0.6/1kv Electrical Armoured Power Cable

Electric cable (215).jpg 

construction

Conductors

The conductors shall be either of Class 1 or Class 2 of plain or metal-coated annealed copper or of plain aluminium or aluminium alloy, or of Class 5 of plain or metal-coated copper in accordance with IEC 60228.

Insulation

PVC Insulation material and thickness shall be as per IEC 60502-1, PVC material shall be Type A as per IEC 60502-1.

Colour Code

Cable 054.jpg

Colour Code (1)

1 CoreRed or Black
2 CoresRed, Black
3 CoresRed, Yellow, Blue
4 CoresRed, Yellow, Blue, Black
5 CoresRed, Yellow, Blue, Black, Green
Above 5 CoresBlack Cores with White numerals

Colour Code (2)

1 CoreBrown or Blue
2 CoresBrown, Blue
3 CoresBrown, Black, Grey
4 CoresBlue, Brown, Black, Grey
5 CoresGreen/Yellow, Blue, Brown, Black, Grey
Above 5 CoresBlack Cores with White numerals

Other colours can be manufactured upon request.

 

Assembly / Inner Covering

The inner coverings may be extruded or lapped. For cables with circular cores, except cables with more than five cores, a lapped inner covering shall be permitted only if the interstices between the cores are substantially filled. A suitable binder is permitted before application of an extruded inner covering. The materials used for inner coverings and fillers shall be suitable for the operating temperature of the cable and compatible with the insulating material.For halogen free cables, the inner covering and fillers shall also be halogen free compound.

Lead Sheath

lead or lead alloy and shall be applied as a reasonably tight-fitting seamless tube.

seperation Sheath

The seperation sheath shall be of extruded PVC Type ST2 as per IEC 60502-1, or other material refer to outer sheath material.

 Cable 128.jpg

Armour

Aluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum/steel tapes and copper/tinned copper wire can also be manufactured upon request.

Outer Sheath

Outer sheath shall be of extruded PVC Type ST1/ST2 as per IEC 60502-1, Polyethylene type ST3/ST7, Halogen free compound ST8, Polychloroprene, chlorosulfonated polyethylene or similar polymers, type SE1 are also available on request.

Contact

Michael Zhang 15269108961.jpg

Inquiry