35mm Power Cable

35mm Power Cable

IEC60227 300/500V 450/750V H07V-U H05V-U H05V2-U Single Core Solid or Stranded Copper Conductor PVC Insulated Non-sheath Cable Structure figure Application The building electric wire can be applied to the copper(aluminum)-core cables in the rated A/C voltage of 450/750V and the below power,...
Chat Now

Product Details

35mm power cable/35mm copper cable/35mm ground cable


Product Description


vv.png

1. Introduction

For Armoured Cable , either chemical method or physical method is employed to transform the molecular structure of PE from chain into three-dimensional network, i.e. thermo-plastic PE is transformed into thermosetting XLPE. After cr·oss-linking, the thermal and mechanical properties of PE have been greatly improved while its excellent electrical property are still retained.

The maximum permissible operating of the conductor of a XLPE insulated power cable is 90°C.which is higher than that of paper, PVC or PE insulated power cable. The cable has the advantage of simplicity in construction, lightness in weight, convenience in application besides its excellent electrical, thermal, mechanical and anti-chemical corrosion properties. It can also be laid with no limitation of level difference along the route.

The mechanical and electrical properties of these cables are accordant with GB/T12706-2002 Power cables extruded insulation and their accessories of elated voltages 1kV(Um=1.2kV)up to 35kV(Um=40.5kV) and IEC60502-1997 Extruded insulation power cables and appendices for rated voltages 1kV up to 30kV.

 

2 The Cable is manufactured according to the standard of

   GB/12706-2002 or IEC,BS,DIN and ICEA upon request.

Electric cable (692).jpg 

3 .The Cable is suitable for use in power transmission and distribution lines with rated power frequency voltage 0.6/1 kV~26/35 kV.

 

4. Instruction of application

4.1 Rated voltages: 0.6/1 kV~26/35 kV

4.2 The ambient temperature for installation: ≥0°C

4.3 Maximum conductor temperature in normal operation:≤90°C

4.4 Max operating temperature of con. When cable short-circuited (5s maximum duration): 250°C

4.5 Permissible bending radius:

Single cable: [20(D+d) ±5%] mm

Multi cable:[15(D+d) ±5%] mm

 

5,Type,designation and application

Type

Designation

Application

Cu

Al

YJV

YJLV

XLPE insulated PVC sheathed power cable

Suitable for indoor, channels, conduits. Unable to bear mechanical stress.

YJY

YJLY

XLPE insulated PE sheathed power cable

YJV22

YJLV22

XLPE insulated steel-tape armored PVC sheathed power cable

Suitable for under ground, can bear mechanical stress, but can not endure large pulling force.

YJV23

YJLV23

XLPE insulated steel-tape armored PE sheathed power cable

YJV32

YJLV32

XLPE insulated fine steel-wire armored PVC sheathed power cable

Can be installed in vertical well, and bear large mechanical pulling force.

YJV42

YJLV42

XLPE insulated steel-wire armored PVC sheathed power cable

YJV33

YJLV33

XLPE insulated fine steel-wire armored PE sheathed power cable

YJV43

YJLV43

XLPE insulated steel-wire armored PE sheathed power cable

 Cable 053.jpg


Feature


1.Copper armoured cable 4 core 25mm 35mm

2.XLPE Insulated and PVC Jacket Power Cable
3.CCC IEC Certification

 

Parameter


1.Voltage Uo/U 0.6/1KV 

2.Long-time working temperature should be lower than 70°Cshould not be lower than 0°C.

3.Minimum bending radius: minimum bending diameter is two times of cable diameter while test binding 

 

Specification


Type: VV VV22 YJV YJV22

Strandard: TICW/02-2009
Voltage: 0.6/1KV

Specification: 1/5 core 0.5mm2-630mm2

Length: 100M 300M 500M 1000M

Application


Copper armoured cable 4 core 25mm 35mm has excellent chemical corrosion resistance, but also has the properties of flame retardant and non water-absorption and suitable for underground installation, which can withstand certain mechanical pressure,but can’t withstand mechanical tension.

Electric cable (491).jpg

1, What’s the MOQ?

One roll. 100M/200M/300M/305M/500M/Roll.

 

2, How to get the samples?

We have most of the commonly used samples in Stock.

We can offer the free samples immediately.

 

3, What’s the payment terms?

TT, LC, DP, Western Union and Paypal are available.

 

4, What’s the delivery date?

Most of the commonly used products are in Stock. We can arrange it within one day.

We will arrange the delivery date as your requirement while the Bulk Production.

 

5, How to visit your factory?

We are located in Huizhou City, Guangdong Province, closed to Guangzhou, Shenzhen and Hong Kong. Only one and a half hours drive away. Convenient for visit.

 

 

Contact:

 

Michael Zhang 15269108961


Inquiry